Adding an OLED display to an OpenWrt router
![](https://tristam.ie/wp-content/uploads/2023/05/openwrt_oled_0-768x432.jpg)
Plays with tech.
Plays with tech.
Updates: Wow, this post blew up – thanks to everyone who has been checking it out! 1. I’ve managed to get the oled display to work 🎉 check it out here -> Adding an OLED display to an OpenWrt router.2.…
This case is a continuation of my original design of a 1u enclosure for a Raspberry Pi 3/3B+/4 and a 2.5′ HDD or SSD. Have a look at that post for more info about stacking and rack mounting the enclosure.…
In my quest to automate everything, I’ve built this automation in Home Assistant that shuts down Octoprint and then turns off a Sonoff that powers my Creality Ender 3 v2 Neo 30 minutes after a print completes. Prerequisites Part 1…
This is a remix of this arm and this camera case. My design allows you to mount a Raspberry Pi V1/V2 camera with a Neopixel LED strip to your Creality Ender 3 v2 Neo printer. Parts You can find the…
This is designed to be a 1u enclosure for a Raspberry Pi 3/3B+/4 and a 2.5′ HDD or SSD. Included are brackets to stack two enclosures and arms to mount two in 1u of a standard 19′ rack. The rack…
I remixed this design to create an enclosure that protects larger Zigbee temperature and humidity sensors (like the ones from Tuya and Sonoff) from the elements so they can be used outdoors. The vertical column includes a mounting hole so…
I created this case for a Raspberry Pi 4, POE HAT, 2.5′ Hard Drive and a SATA to USB adapter. There is a slot on the IO side of the case that can be used to store the excess cable…
I designed this simple bench PSU to have one variable DC output and 2 x USB A ports. It’s based on a 19v 65w Dell laptop power supply that I had lying around but I wouldn’t recommend this route to…
I remixed is because the original design didn’t have enough width for the cables to exit the PSU compartment. The original power supply cover for the Ender 3 v2 (and v2 neo) restricts the airflow to the power supply so…