Skip to content
No results
  • Home
  • Categories
    • 3D Design & Printing
    • Home Assistant
    • Linux
    • Python
    • Raspberry Pi
      • Raspberry Pi Cases
  • Tristam’s list of essential bits and pieces
  • About me
Tristam

Plays with tech.

  • About me
  • Home
  • Smart Home
    • Raspberry Pi
      • Raspberry Pi Cases
    • OpenWrt
  • Home Assistant
    • Voice Assistants
  • 3D Design & Printing
    • Toolbox essentials
  • Career Portfolio
Tristam

Plays with tech.

  • 3D Design & Printing, Home Assistant

Privacy friendly ESP32 smart doorbell with Home Assistant local integration

Privacy focused “smart” doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. This project is aimed at being simple while allowing a ton…

  • Tristam
  • 3 August 2023
  • 48 Comments
  • 3D Design & Printing, Home Assistant

Home Assistant compatible desk fan (120mm)

Frustrated by the lack of fans that integrate with Home Assistant, I decided to modify this 120mm fan stand to include a compartment for a Wemos D1 mini and a buck converter. This allows us to run ESPHome on a…

  • Tristam
  • 22 July 2023
  • 1 Comment
  • OpenWrt

Using a Comfast CF-926AC V2 WiFi adapter with OpenWrt

OpenWrt is very fussy with USB WiFi adapters and I have only managed to get two adapters to work reliably – my old TP-Link WA722N v1.1 that has an Atheros AR9271L chipset and the Comfast CF-926AC which uses the MediaTek…

  • Tristam
  • 7 June 2023
  • 5 Comments
  • Linux, OpenWrt, Raspberry Pi

Adding an OLED display to an OpenWrt router

Let's use an ESP8266 to add a 0.91' OLED display to my Raspberry Pi based travel router that runs OpenWrt.

  • Tristam
  • 28 May 2023
  • 1 Comment
  • 3D Design & Printing, OpenWrt, Python, Raspberry Pi, Raspberry Pi Cases, Smart Home

Raspberry Pi x OpenWRT Travel Router

Updates: Wow, this post blew up – thanks to everyone who has been checking it out! 1. I’ve managed to get the oled display to work 🎉 check it out here -> Adding an OLED display to an OpenWrt router.2.…

  • Tristam
  • 14 May 2023
  • 14 Comments
  • Raspberry Pi, Raspberry Pi Cases

1u Raspberry Pi enclosure with space for 2 x 2.5′ drives

This case is a continuation of my original design of a 1u enclosure for a Raspberry Pi 3/3B+/4 and a 2.5′ HDD or SSD. Have a look at that post for more info about stacking and rack mounting the enclosure.…

  • Tristam
  • 22 April 2023
  • 1 Comment
  • Linux, Python, Raspberry Pi

Monitoring a Raspberry Pi with Python, InfluxDB and Grafana

Inspired by this guide, I wrote this script to send system stats to InfluxDB 2.0 for a Pi that’s running as my off site backup server. More info about that project (with 3D printed case) in this article. While this…

  • Tristam
  • 20 February 2023
  • 3D Design & Printing, Home Assistant

ESPHome whole home power monitor

This AC power monitor can measure the current flowing over any mains power cable. It’s based on a Wemos D1 Mini (ESP8266 micro controller) and a 100A:50mA split core current transformer. For this project, we will use the ESPHome add-on…

  • Tristam
  • 19 February 2023
  • 1 Comment
  • Python, Raspberry Pi, Raspberry Pi Cases

Pi NAS (Raspberry pi 3 B+ with 2 x 3.5′ HDD’s)

I designed this Raspberry Pi NAS to connect two 3.5′ HDD’s to a Pi 3B+. There is a DC buck converter for the Pi so you don’t need to have a separate 5v power supply. With the current design, you…

  • Tristam
  • 18 February 2023
  • 3 Comments
Prev
1 2

Copyright © 2026 - Tristam