Raspberry Pi 4 SSD/HDD case
I created this case for a Raspberry Pi 4, POE HAT, 2.5′ Hard Drive and a SATA to USB adapter. There is a slot on the IO side of the case that can be used to store the excess cable for the SATA to USB adapter which makes this case slightly unique.
Parts
- 4 x M3 x 8mm screws to mount the HDD/SSD to the case
- 3 x M3 x 8mm screws to attach the side panel
- 4 x 12mm M2.5 screws with nuts to mount the Pi
- (Optionally) 4 x rubber pads/feet
You can find the .stl’s here.
Print settings
- Printer: Creality Ender 3v2 Neo
- Filament: Creality PLA – Grey
- Bed temperature: 60’c
- Nozzle temperature: 205’c
- Infill: 20%
*The product links in this post may contain affiliate links. I donate 20% of these earnings to the Good Work Foundation to help innovate learning in South Africa’s rural communities.
Thanks for making it to the end of the post!
